Coming in the New Year!!
Lay siege to your enemies with the Siege Engine Bass Pre-Amp. The Siege Engine is powerful bass weaponry with TONS of overdrive, flexibility and outputs in a large pedal format.
The Overdrive section features 6 bands of EQ and Drives that allows you to carefully direct the gain and tone. Use as a pedal with true bypass in your effects chain, feed a power amp directly, as well as sending DI outs for recording or live mixing.
4 outputs (6 if you include tuner and headphones):
Master high level 1/4" out to send to a power amp.
Master out instrument level to connect to more effects or instrument amp.
Balanced XLR DI out to send to mixers, recording gear, etc.
Unbalanced 1/4" DI out to send to other gear.
• Input and Pre Gain: The high impedance jfet input amp feeds directly into a Pre Gain control that can be pushed hard to introduce some drive, which in turn pushes the overdrive section harder or lighter. It’s a quick way to alter the overall aggression.
• Overdrive Section: The signal is split into Deep, Bass, Lo Mid, Mid, Hi Mid and Treble frequency bands. Each band has a Level control and it’s own Drive control. The Deep band has no overdrive so your far low end is kept completely dry. All the bands are summed back together to form a harmonically rich tone that still maintains the integrity of all the notes.
• 4 footswitches: Bypass, Mute, Overdrive, and Effects Loop, to enable full control over all lines of attack.
• Master Outputs: There are two master outputs, both controlled by the Master Volume and Bass and Treble shelf EQs. One is a high level output for feeding power amplifiers and the other is instrument level to send to bass amps or other effects chains.
• Line Outputs: Balanced DI XLR and unbalanced 1/4” jacks to connect to PA, mixing consoles, recording gear or other amplifiers.
• Headphone Output: Connect headphones to use the amp for practice with an aux input to connect to outside music sources.
• Tuner Output: Hit the Mute foot switch and the dry tuner output stays on for silent tuning in live settings.
• DC Power: Requires 9 to 18 volts DC with 420mA of current, like most pedal power supplies.
