Battering Ram Q2

The Battering Ram Q2 is basically a Battering Ram V2.6 but with a 3 band parametric EQ in front of it. You can choose to just have EQ, or EQ going into the overdrive, or EQ going into the fuzz, or EQ going into overdrive and fuzz in parallel.
The Battering Ram Q2 works equally well for guitar or bass or anything else you want to plug into it. The EQ section is on when the pedal is turned on. Overdrive + Fuzz means that the overdrive and fuzz channels can work in parallel or separately, each channel receiving the signal from the EQ, working their magic and then mixed back together at the output. The Overdrive channel with it's Gain, Treble and Level controls is switched on via the Overdrive stomp switch while the Fuzz channel has it's own stomp switch and Gain, Tone, and Level controls. The Octave stomp switch changes the fuzz channel into an octave up fuzz.

The Battering Ram Q2 differs from the Battering Ram Q1 only in the EQ section. There are 2 less controls:
The Bass Frequency is no longer variable.
The Treble control has been removed as the Hi Mid frequency can cover the treble frequencies and there are treble and tone controls on the overdrive and fuzz sections.

  • True bypass stomp switch to turn the entire unit on/off.
  • Heavy duty 7.4" x 4.7" x 1.3" Hammond aluminum enclosure
  • Requires a 9 volt DC adaptor, or a 9V battery. Standard pedal adaptors like Boss PSA, Godlyke Powerall, Onespot.
  • 30mA current draw.

User Manual

Great write-up of the Battering Ram Q on a German bass site.

Ask a Question


Please Choose:

9V battery included


Add to Cart:

This product was added to our catalog on Thursday 13 December, 2018.

Your IP Address is:
Copyright © 2024 Wounded Paw. Powered by Zen Cart