All Products

The Para D's wah circuit is based on the legendary and rare Tycobrahe Parapedal Wah used by Black Sabbath and others in the 70's. It has a hard to describe synth or phaser like sound with a huge sweep to the filter peak practically through the...

The Battering Ram Q2 is basically a Battering Ram V2.6 but with a 3 band parametric EQ in front of it. You can choose to just have EQ, or EQ going into the overdrive, or EQ going into the fuzz, or EQ going into overdrive and fuzz in parallel. The...

Blend between two effects loop using the foot treadle of an expression pedal shell. Toe position is effects loop A and heel position is effects loop B, in the middle of the foot treadle's travel is 50% effects loop A / 50% effects loop B. Either...

Blend your effects with the clean instrument signal using a wah type foot treadle to control the blend. Same circuitry as the Blender V1 but in an expression pedal shell. The foot treadle controls the blend in that 50/50 effects/clean is right in...

The Echo Drive is a delay / reverb pedal with overdrive on the delay signal only. With the Gain up every repeat will get more distorted and quickly devolve into drone sounds and other fun stuff. Lower Gain settings give a bit of dirt to the delay...

A 4 channel mixer in pedal format. Every channel is fully buffered to eliminate any interaction (tone or volume loss) between inputs. The output has a slight boost so that quieter instruments can be leveled with louder ones without any loss of...

Split your instrument signal into up to 4 outputs for tuners, separate amplifiers or different effects chains. Every output is fully buffered to eliminate any interaction (tone or volume loss) between the channels. Heavy duty 'BB' size, 4.7" x 3.7"...

Modeled on the MXR Phase 90 with Depth and Feedback controls added. Full range so can be used for guitar or bass. The blue LED flashes in time with the Rate control. Youtube demo by Tonefactor YouTube demo posted by a customer Heavy duty 'B' size...

Analog sounding delay that can go from short reverb sounds to long delays. Full frequency range for bass or guitar. Heavy duty 'B' size, 2.3" x 4.4" Hammond aluminum enclosure True Bypass Bright Blue LED 30mA current draw Use a standard 9V adapter...

Popless mic on/off footswitch. Turn a microphone on or off instantly without any pops like when simply unplugging the cable. Works with dynamic and condenser microphones. Red LED indicator shows when the mic is muted and is the only thing powered by...

Offers 20dB of clean boost with tone controls. The boost is clean but adding 20dB can overdrive the input to amplifliers or other devices in the signal chain to get pleasing results. The Baxandall type tone section offers boost or cut to treble and...

Based on the 60's Univox Super-Fuzz for searing octave up fuzz tones. Instead of a tone switch there is a tone knob which dials in the amount of mid-cut. Heavy duty 'BB' size, 3.7" x 4.7", Hammond aluminum enclosure True Bypass Uses standard 9v...